| System Information | | Processor | Mobile 11th Generation Intel® Core™ and Celeron® Processors - 10nm processer
Core™ i7-11850HE 45W (35W cTDP), 8C/16T (non-ECC)
Core™ i5-11500HE* 45W (35W cTDP), 8C/12T (non-ECC)
Core™ i3-11100HE 45W (35W cTDP), 4C/8T (non-ECC)
Celeron® 6600HE* 35W, 2C/2T (non-ECC)
| | Platform Controller Hub | HM570E
| | System Memory | Up to 3x 260-pin DDR4-3200 SO-DIMM with up to 96 GByte
| | I/O Chipset | EC (ITE IT5571) | | BIOS Information | AMI uEFI BIOS, 128 Mbit SPI Flash ROM | | Watchdog Timer | H/W Reset, 1sec. ~ 65535sec. and 1sec./step | | H/W Status Monitor | Monitoring System Temperature, Voltage and FAN Status with Auto Throttling Control | | I/O | | USB Port | 4 x USB 3.2 Gen.2x1 (10 Gbps)
8 x USB 2.0 | | SATA | 4 x SATA3.0 (6.0Gb/s) | | DIO | 8bit GPIO(NCT5655Y), WDG/HW monitor/FAN | | MIO | 4 x SATAIII 6.0Gb/s (Support RAID0,1,5,10)
1xLPC (via eSPI to LPC bridge), I2C, SPI, SMBus, 2 x UART(2-wire) | | HDMI | HDMI 2.0b | | Display | | Graphic Chipset | Intel Gen 12 Graphics | | Spec. & Resolution | HDMI 2.0b: 4096 x 2304 @ 60Hz
DP 1.4: 4096x2304 @60Hz
LVDS: 1920x1080 @60Hz, support Dual-channel 18/24-bit LVDS (via eDP-to-LVDS IC 7511B)
VGA: 1920x1200 @60Hz (via DP to VGA IC Chrontel® 7517A)
eDP 1.4b: 4096x2304@60Hz (Optional) Per Intel design guide, need to add Redriver/Redriver in carrier board to fine tune the signal of DP1.4.
(Only support 4Lanes 2560x1440 & 2Lanes 1920x1080) | | Multiple Display | Supporting 4 display up to 2K (3DDI+eDP) | | DDI | HDMI/DP (default) | | Interface | Dual-channel 18/24-bit LVDS (LVDS via CH7511B) | | 支持软件 | | OS | Microsoft® Windows 10 64-bit
Linux
| | Ethernet | | LAN Chipset | Intel®i225LM | | Ethernet Interface | 10/100/1000/2500 Base-Tx GbE compatible | | Mechanical & Environmental | | Operating Temperature | 0 ~ 60 °C (32 ~ 140 °F)
| | Storage Temperature | -40°C ~ 75°C (-40°F ~ 167°F) | | Operating Humidity | 40°C @ 95% Relative Humidity, Non-condensing | | Weight | 0.44lbs(0.2kg) | | Power Requirement | +9~ +19V | | ACPI | Single power ATX Support S0, S4, S5
ACPI 5.0a Compliant
| | Power Mode | AT/ATX | | Dimension (L x W) | 125*95 mm (3.74” x 4.92”) |
|