| System |
| Processor | Intel® Celeron® J1900 4-Core 2.0GHz processor |
| System Memory | 1 x 204-Pin DDR3L 1333MHz SO-DIMMup to 8 GB |
| Watchdog Timer | H/W Reset: 1sec. ~ 65535sec./min. |
| H/W Status Monitor | Monitoring System Temperature and Voltage with Auto Throttling Control |
| Board | ECM-BYT + AUX-032 |
| Expansion |
| Expansion | 1 x Mini PCIe |
| Storage |
| Storage | 1 x CompactFlash Type I/II Socket
1 x mSATA
1 x 2.5" Drive Bay |
| I/O |
| USB | 5 x USB 2.0
1 x USB 3.0 |
| COM Port | 3 x RS-232
1 x RS-232/422/485
Can be set as RS-232/422/485 by BIOS |
| Other | 2 x Knockouts for Antenna Mounting |
| DIO | 1 x 8bit GPIO |
| Display |
| Chipset | Intel® Valleyview SoC integrated Graphics |
| Resolution | VGA:Max. resolution 2560x1080@ 60Hz
HDMI:Max. resolution 1920x1200@ 60Hz |
| Audio |
| Chipset | Realtek ALC892
supports 5.1-CH |
| Audio Interface | Mic-In, Line-In and Line-Out |
| Ethernet |
| Chipset | 2 x Intel® I211AT |
| Ethernet Interface | 10/100/1000 Base-Tx GbE compatible |
| LAN Port | 2 x RJ-45 |
| Mechanical & Environmental |
| Operating Temperature | (w/SSD, mSATA, CF), ambient w/ air flow
-10°C ~ 60°C (14°F ~ 140°F)
(w/HDD), ambient w/ air flow
0°C ~ 45°C (32°F ~ 113°F)
For Valleyview I SoC (w/SSD, mSATA), ambient w/ air flow
-40°C ~ 75°C (-40°F ~ 167°F) |
| Storage Temperature | -40°C ~ 75°C (-40°F ~ 167°F) |
| Operating Humidity | 40°C @ 95% Relative Humidity, Non-condensing |
| Construction | Aluminum + Metal |
| Mounting Kit | Wall Mount kit (Standard) |
| Dimension (L x W x H) | 10.67" x 5.91" x 2.17" (271mm x 150mm x 55mm) |
| Vibration Test | With SSD/mSATA : 5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis |
| Shock Test | With SSD/mSATA : 50Grms, IEC 60068-2-27, Half Sine, 11ms |
| Certifications |
| Certification Information | CE
FCC Class A |
| Software Support |
| OS Information | Win 7
Win 8
Linux |
| Ordering Information |
| Ordering Information | ERS-BYT-1900-A2-1R
Intel® Celeron® SoC Processor J1900 Fanless Rugged Embedded System |
| Power Requirement |
| Power Connector | Lockable DC Jack |
| Power Requirement | +12V ~ +26V |
| ACPI | Single Power ATX Support S0, S3, S4, S5
ACPI 3.0 Compliant |
| Power Mode | AT/ATX (ATX is default setting) |
| Adapter | Input: 100 ~ 240Vdc/ 50 ~ 60Hz
Output: 60W Adapter (12V @ 5A Adapter) AC-DC Adapter |